Ridge cap roll forming machine
Other machine we manufacture
Cold roll forming mahcine, color steel roll forming machine, roof and wall panel machine, decking floor roll forming machine, floor decing forming mahcine, stud and track roll forming machine, Z and C purlin machine, highway guardrail roll forming machine, cable tray machine, and so on.
Working flow:
Decoiler-----feeding------roll forming ------ pressing-----cutting----output table
Machine components:
De-coiler--------------------------------------------1set
Forming machine--------------------------------1set
Pressing device----------------------------------1set
Cutting device ------------------------------------1set
PLC control box ----------------------------------1set
Hydraulic pump station-------------------------1set
Techincal description:
Decoiler
Coil inner diameter: 450mm--700mm
Mx width of coiling: 1250mm
Mx weight of loading: 5000kg
Roll forming machine
Material thickness: 0.3-1.0mm
Feeding and effective width depends on profile drawing
Roller steps: 16
Shaft material: 45# steel, bearing steel outer diameter 80mm
Roller material: 45#steel after treatment
Forming speed: 8-10m/min
Voltage: 380V/50Hz/3 phase
Cutting device
Hraulic cutter
Blade and mould material: Cr12 steel with quenched treated HRC58-60
Cutting system advanced hydraulic drive, after automatic cutting after forming.
Power: 3kw
Cotrol system
Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron
Length Error: ± 2mm
Transducer: Panasonic
Output table
It is simple and used to load finished product.
Length: 6m
Service
MACHINE PHOTOS
Service
Packing and loading photos
Contact:
Abby Song
MOB: +86-18701854523
TEL: +86-21-67298619
http://www.shafjx.com
Other machine we manufacture
Cold roll forming mahcine, color steel roll forming machine, roof and wall panel machine, decking floor roll forming machine, floor decing forming mahcine, stud and track roll forming machine, Z and C purlin machine, highway guardrail roll forming machine, cable tray machine, and so on.
Working flow:
Decoiler-----feeding------roll forming ------ pressing-----cutting----output table
Machine components:
De-coiler--------------------------------------------1set
Forming machine--------------------------------1set
Pressing device----------------------------------1set
Cutting device ------------------------------------1set
PLC control box ----------------------------------1set
Hydraulic pump station-------------------------1set
Techincal description:
Decoiler
Coil inner diameter: 450mm--700mm
Mx width of coiling: 1250mm
Mx weight of loading: 5000kg
Roll forming machine
Material thickness: 0.3-1.0mm
Feeding and effective width depends on profile drawing
Roller steps: 16
Shaft material: 45# steel, bearing steel outer diameter 80mm
Roller material: 45#steel after treatment
Forming speed: 8-10m/min
Voltage: 380V/50Hz/3 phase
Cutting device
Hraulic cutter
Blade and mould material: Cr12 steel with quenched treated HRC58-60
Cutting system advanced hydraulic drive, after automatic cutting after forming.
Power: 3kw
Cotrol system
Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron
Length Error: ± 2mm
Transducer: Panasonic
Output table
It is simple and used to load finished product.
Length: 6m
Service
Terms | |
Payment type | 30% T/T prepaid and balance should be paid before loading |
Delivery time | 30days after receving advance payment |
Guarantee period | 18monthes free service/ pay service all the machine life |
Installation and training | If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face. Without visiting, we will send you user manual and video to teach you to install and operate. If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things. |
Service
Terms | |
Payment type | 35% T/T prepaid and balance should be paid before loading |
Delivery time | 30days after receving advance payment |
Guarantee period | 18monthes free service/ pay service all the machine life |
Installation and training | If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face. Without visiting, we will send you user manual and video to teach you to install and operate. If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things. |
Packing and loading photos
Contact:
Abby Song
MOB: +86-18701854523
TEL: +86-21-67298619
http://www.shafjx.com